Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Ok, Difference in lower-level component....

Created by: freeman1907 at: 4/23/2012 5:45 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

4/23/2012 5:45 PM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	Hi There "Ok, Difference in lower-level component",It is not an error but warning.And it disturbs me while simulating on wincc v11 although there is no simulation problem.You can see this warning at the attachment.Could you please help me to solve this problem..?? Attachment plc.JPG (680 Downloads)
freeman1907 Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

4/23/2012 8:25 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 9/15/2022 Posts: 229 Rating: (25)	Hi, See the diagnostic buffer clicking in online diagnistic in CPU, for more details. Regards.
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer

4/24/2012 8:38 AM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	Hi There.... In diagnostic buffer it says that ; "Distributed I/Os: End of the synchronization with a DP master/IO controller on slot 1 Number of distributed stations: 1 Priority class: 2" i am beginner in Plc could you please help me to solve this?? With Kind Regards
freeman1907 Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

4/24/2012 12:54 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 9/15/2022 Posts: 229 Rating: (25)	Good morning; I think you have a distributed I/O device that must be configured, DP Address, baud rate, or inconsistency in online/offline block that doesn't mach. Please, post the project if possible, and a print of network view online. Regards
	Last edited by: Gabriel de Oliveira at: 4/24/2012 12:55 PM Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer

4/25/2012 4:15 PM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	Project is at the attachment... With Kind Regards Attachment Ox~1.zip (138 Downloads)
freeman1907 Posts: 28 Rating: (1)	Last edited by: freeman1907 at: 4/25/2012 4:28 PM
Suggestion To thank Quote Answer

4/25/2012 4:41 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 9/15/2022 Posts: 229 Rating: (25)	Dear, I Think you attach a simatic step 7 v5.x project, and not a TIA Portal project like prints in old post. Can you attach the TIA Project? Regards
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer

4/25/2012 5:15 PM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	Sorry for my faultI attached wrong project file... Now i attached in 2 parts...Part1 With Best Regards.... Attachment OXY_ROBOT.zip (128 Downloads)
freeman1907 Posts: 28 Rating: (1)	Last edited by: freeman1907 at: 4/25/2012 5:16 PM
Suggestion To thank Quote Answer

4/25/2012 5:17 PM	Rate (0)
freeman1907 Posts: 28 Rating: (1)	and part2 Attachment robo2.zip (112 Downloads)
freeman1907 Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on