Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

old pressure transmitter

Created by: John02 at: 2/10/2014 11:21 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

2/10/2014 11:21 AM	Rate (0)
John02 Posts: 8 Rating: (0)	HiI am unable to change the range of transmitter 7MF4422-1GA02-1BB1-Z because there is no Display available. How can this be performed?
John02 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

2/10/2014 12:47 PM	Rate (0)
Celsius Regular Member Joined: 1/2/2013 Last visit: 2/8/2018 Posts: 38 Rating: (4)	Hi John02 The range can be setusing the push buttons.Start of scale: Apply a pressure corresponding to the start of scale to the transmitter. Press UP and DOWN keys together for about 2sFull scale: Apply a pressure corresponding to the full scale to the transmitter.Press M key and hold it. Press UP and DOWN keys together for about 2s.

Suggestion To thank Quote Answer

2/10/2014 10:48 PM	Rate (0)
Chook Experienced Member Joined: 6/13/2006 Last visit: 9/21/2023 Posts: 201 Rating: (8)	John02 HiI am unable to change the range of transmitter 7MF4422-1GA02-1BB1-Z because there is no Display available. How can this be performed? Hi John, You cannot do anything with a Non display unit unless you find a indicator ( LCD display or connect it to your PC ) Regards, chook
	[IMG]http://i17.tinypic.com/66b7jas.jpg[/IMG]
Suggestion To thank Quote Answer

2/13/2014 11:18 AM	Rate (0)
John02 Posts: 8 Rating: (0)	Thank you Celsius!I was able to set the range following your advice.
John02 Posts: 8 Rating: (0)	Last edited by: John02 at: 2/13/2014 11:18 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users CS Moderator

|

Share this page:

Share this page on...

Follow us on