Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OLE DB Operation Generated errors

Created by: autom at: 11/25/2008 5:47 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/25/2008 5:47 PM	Rate (0)
autom Posts: 89 Rating: (1)	Hello my friends I have a sirius problem with my database. I installed wincc flexible 2005 RunTimewithHF4in a PC. I also installed SQL Express 2005. After a few days of recording, an error occured Time out expired Multiple step OLE DB operation generated errors. Check each ole DB status value, if available no work was done. after a restart therecords was fine but after a few hours that happened again. Please Help me this is a sirius problemfor me. There is away to avoid this message and dont 'time out expired'.. Thanksin Advance.
autom Posts: 89 Rating: (1)
Suggestion To thank Quote Answer

11/27/2008 6:08 PM	Rate (0)
The Body Gold Member Joined: 5/13/2008 Last visit: 12/18/2019 Posts: 836 Rating: (71)	Hi autom, have a look at this FAQ, maybe you get some helpful hints: http://support.automation.siemens.com/WW/view/en/24677044
	mfG / Best regards Roland
Suggestion To thank Quote Answer

11/28/2008 12:30 PM	Rate (0)
autom Posts: 89 Rating: (1)	Thanksa lot for your help but this link doesnt help me at all. The only thing that i discovered, is if a have a lot of data in a table about350000 and when iwant to opena graph the time out error occured. I thing thisis wincc flexible becauseif after 30 sec winccflexible dont display in a graph anything, then time out error occured. Any suggestions???
autom Posts: 89 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on