Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OLM G12 as RS485-FO converter

Created by: Tima at: 3/28/2008 12:14 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/28/2008 12:14 PM	Rate (0)
Tima Posts: 2 Rating: (0)	Hello, all We try to find the proper way how to use OLM as RS485-FO-RS485 converter. as far as i understand it can convertonlyPROFIBUS protocol, not electrical RS485, am I right? BR, Tim
Tima Posts: 2 Rating: (0)	Last edited by: Tima at: 3/28/2008 1:12 PM
Suggestion To thank Quote Answer

3/29/2008 12:30 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Dear Tima, you are right, the only Protocol that can be used with OLM's is PROFIBUS. It checks the Protocol on size, start delimiter... and some other issues. So you will have a Problem using the OLM for other Protocols... as long as the ASIC in the OLM is still the way it is today. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

3/31/2008 8:26 AM	Rate (0)
Tima Posts: 2 Rating: (0)	we have tested RS485-FO Converter (7XV5650-0BA00/BB). it works. For sad, I can't find it in the catalog. is there such a converter with redundant ring?
Tima Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/31/2008 12:05 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Dear Tima, the order# 7XV5650-0BA00 isa spare part.This device can be found in the Mall. Sadly I do not know any devicethat can workin aring structure, maybe you will findsomething else. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on