Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

one time, two time push

Created by: fillemon at: 4/7/2012 1:02 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/7/2012 1:02 AM	Rate (0)
fillemon Posts: 2 Rating: (0)	hello i'm new to logo, and i would like some thoughts about the next problem. i have two pushbottons, after each pushbutton a pulse relay. pushbutton 1 - PR 1 - pushbutton 2 - PR 2 - i got pusbutton 2 to the reset button of PR1 and vice versa. So if i push pushbutton 1 the output is 1, if i push button 2: the output of 1 is reset to 0 and the output of 2 becomes 1. I would like that IF one of the two lines are 1 and you press the button of the other line, the first thing that happens is that all the lines are 0. And if you push a second time: then that line becomes 1 i hope you understand a bit. thanks
fillemon Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/7/2012 3:51 PM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/27/2023 Posts: 1192 Rating: (112)	Yes, usa a puls relay and use the reset function. See the example Attachment Pushpush.zip (80 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on