OneTouch Panel 2 PLC

Hello Adrian_botez

It is a normal konfiguration. you have often Systems with more than one Panel to the same PLC and often they are similar so that they "look to the same Datapoints".

The only thing you have to look is that the PLC have enough Communicatoin Ressources.

Bye Murof

I just upload a network diagram below to explain the situation. The PLC1 is connected to a TP700Comfort Panel via MPI. The PLC 2 has his own panel, in this case a KTP 600 Basic Color. The idea is to get some data from the PLC2 and show it on a new window in the TP700. 

So I create a new Ethernet Conexion between the TP700 and the PLC2. I have all the Tags into a new group and redirected to this new conexion. 

It will work?

Hello adrian_botez

Ah you want to communicate over two different interfaces.

This is I Think also possible, i think I´ve tested this in the past. In this case you have to use a different Access Point. You can use S7ONLINE1 or something else. The Panel can use any Access Point for communication. It  should work.

Have a nice Day

Bye Murof

Yes it works. Thx.

[snip]

----------------------------------------------------------------------------------------------------
New question published by adrian_botez is split to a separate thread with the subject How can I block the use of one panel when I use the other?

Best regards
Min_Moderator