Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OP 270 halt!

Created by: tevins at: 8/23/2006 10:28 AM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

8/23/2006 4:04 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 9/29/2023 Posts: 8593 Rating: (1132)	Hi, I agree with nemo, the CF-card can cause the problem. When removing the CF-card solves your problem, then you'll have to contact Siemens representative. They can help you. Best regards, Wizard
	Last edited by: Wizard at: 8/23/2006 4:07 PM
Suggestion To thank Quote Answer

8/28/2006 7:10 PM	Rate (0)
tevins Regular Member Joined: 2/17/2006 Last visit: 6/21/2021 Posts: 35 Rating: (1)	I removed card but my OP panel freeze after 2 days again. [:mad:]

Suggestion To thank Quote Answer

8/28/2006 7:29 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	and you were already using WinCC flexible 2005 SP1???? If yes, please contact Simatic Customer Support via Support Request.
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on