Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OP030 System Installation

Created by: Tom_Li at: 5/31/2009 5:42 AM (5 Replies)

Rating (2)

Thanks 0

6 Entries

5/31/2009 5:42 AM	Rate (0)
Tom_Li Posts: 72 Rating: (0)	Dear all, Now we have to install system to OP030,but for the first time for us to do,so we need your advice for how to install OEM system to OP030?
Tom_Li Posts: 72 Rating: (0)
Suggestion To thank Quote Answer

6/3/2009 12:05 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	Hi OP030 ? Are you sure. No MMC1xx, or PCU20, PCU50 ?
	Karl
Suggestion To thank Quote Answer

6/3/2009 1:43 PM	Rate (1)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (51)	hi this OP030 is a old product.. can you give me the type number of the OP so that i will try to get some information. with regards Ram

Suggestion To thank Quote Answer

6/3/2009 2:39 PM	Rate (1)
pfuser Silver Member Joined: 9/18/2006 Last visit: 9/2/2024 Posts: 591 Rating: (64)	Hi. It can to you will help. .............................................................................. The software package OP030 screen kit software SW. 34.01 comprises four diskettes Contents of the diskettes 570886.3256.34.01 : Diskette 1,2: System software Diskette 3 : Development kit Diskette 4 : Language extension ASIA Order no.: 6FC5253-3AX31-2AB0 ............................................................................... This process will allow you to install or upgrade your OP030 Operator Panel software components. It supports the installation of the following packages: - System Software - Development Kit - User Languages - Alarm Texts - System Configuration Files ............................................................................... OEM - MODIFICATIONS and ADD-ON's User-supplied Application Program, Screen-Designs and Alarm Texts : If you wish to use your application and texts instead of the delivered standard componentes, you must - invoke SETUP - terminate SETUP after copying the software components for OP030 System and OP030 Development Kit to harddisk by answering <NO> when asked 'continue with INSTALL ' - modify the sourcefiles in <Installation-Dir>\proj\... - build a new application using MICROSOFT Visual C++ Workbench - invoke INSTALL from l:\ (substituted to <Installation-Dir> ) You may also first install the complete software using the standard application and texts and supply your components lateron in a second installation pass. Successes.
	Last edited by: pfuser at: 6/3/2009 2:41 PM
Suggestion To thank Quote Answer

6/8/2009 8:38 AM	Rate (0)
Tom_Li Posts: 72 Rating: (0)	Dear all, Thank you Mr. Pfuser. However,I still have further action about this OP030 to download OEM project to hardware. 1. What software do I need and would anyone one could send me one copy? 2. I've just have only one copy document,does anyone whom had done this case before? Thank you and I need your help soon.
Tom_Li Posts: 72 Rating: (0)
Suggestion To thank Quote Answer

6/12/2009 7:46 AM	Rate (0)
Tom_Li Posts: 72 Rating: (0)	Dear all, Thank you for your support and We've done it .I think it's complex.
Tom_Li Posts: 72 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on