Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OP77A

Created by: CGR013 at: 6/26/2009 9:40 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

6/26/2009 9:40 PM	Rate (0)
CGR013 Posts: 27 Rating: (0)	Hi witch is the cable I need to programm a OP77A? is a rs232-485 cable enouth? I also have a pc adapter (usb-mpi/dp)and a cp5511. since the mpi is 485, can I use the pc adapter to programm it? thanks
CGR013 Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

6/26/2009 9:49 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (994)	EG0871 Hi witch is the cable I need to programm a OP77A? is a rs232-485 cable enouth? I also have a pc adapter (usb-mpi/dp)and a cp5511. since the mpi is 485, can I use the pc adapter to programm it? thanks The PC-Adapter (usb-mpi/dp) is OK.
IBN-Service Posts: 8946 Rating: (994)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users CGR013

6/27/2009 12:36 PM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 4/1/2023 Posts: 4401 Rating: (824)	Dear EG0871, Please find attached the transfer cables necessary for Siemens Panels Attachment Projekttransfer_e_C1.pdf (429 Downloads)
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on