4/25/2016 5:07 AM | |
Joined: 4/12/2016 Last visit: 9/18/2023 Posts: 13 Rating: (0) |
I have same problem my settings look OK, I download to op77b via serial port on the panel ( channel 1 enable on on serial while mpl/dp disable during download) after download change the setting on the panel to (serial to disable while mpi /dp enable ADR 1 and beudrate to 19200, s7 200 adr is 2, but no communication established still showing #######, kindly help me out ------------------------------------------------------------------------------------------ |
Last edited by: Min_Moderator at: 4/25/2016 12:14:22 PMNew subject after splitting |
|
4/25/2016 2:39 PM | |
Joined: 4/12/2016 Last visit: 9/18/2023 Posts: 13 Rating: (0) |
|
This contribution was helpful to1 thankful Users |
4/25/2016 2:48 PM | |
Joined: 4/12/2016 Last visit: 9/18/2023 Posts: 13 Rating: (0) |
Attachmentimages.zip (65 Downloads) |
4/25/2016 3:56 PM | |
Joined: 4/12/2016 Last visit: 9/18/2023 Posts: 13 Rating: (0) |
|
4/25/2016 3:57 PM | |
Joined: 4/12/2016 Last visit: 9/18/2023 Posts: 13 Rating: (0) |
|
4/25/2016 3:58 PM | |
Joined: 4/12/2016 Last visit: 9/18/2023 Posts: 13 Rating: (0) |
|
4/25/2016 4:00 PM | |
Joined: 4/12/2016 Last visit: 9/18/2023 Posts: 13 Rating: (0) |
|
4/25/2016 4:14 PM | |
Joined: 4/12/2016 Last visit: 9/18/2023 Posts: 13 Rating: (0) |
|
4/25/2016 4:15 PM | |
Joined: 4/12/2016 Last visit: 9/18/2023 Posts: 13 Rating: (0) |
|
4/25/2016 4:19 PM | |
Joined: 4/24/2006 Last visit: 5/31/2024 Posts: 8664 Rating: (1154)
|
Hello, Did you try to change in WinCC flexible. The profile from MPI to PPI. Best regards, Wizard |
4/25/2016 4:19 PM | |
Joined: 5/28/2008 Last visit: 5/29/2024 Posts: 4507 Rating: (837) |
Dear Azizbolly, Did you read carefully section 3 of the link shard by our expert "Wizard" in the first reply of this thread? Please In OP, select MPI/DP 19.2 & In WinCC flexible Project select PPI and Baud 19.2 See sec. 3 of this pdf. Attachments7-200_winccflexrt_panels_en.pdf (84 Downloads) |
Last edited by: Ayman Elotaify at: 4/25/2016 4:20:51 PMAyman Elotaify |
|
Follow us on