Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OPC CONNECTIVITY IN WINCC

Created by: decan at: 4/25/2008 9:43 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/25/2008 9:43 AM	Rate (0)
decan Posts: 15 Rating: (0)	SINCE IN WINCC OPC CONFIGURATION, WHEN CONFIGURING SYSTEM PARAMETER WITH OTHER PC WHICH IS IN LAN SERVER AND TRY TO CONNECT THE OPC SERVER OF ALLEN BRADELY>> BROWSE SERVER, ITIS SHOWING THE ERROR no acess to selected opc server EVEN THOUGH I GIVEN THE REMOTEACESS OF OTHER PC WHERE I AM TRYING TO GET THE TAG.BUT WHEN I SETTING TO LOCAL MEANS OWN PC THEN I CAN GET THE TAG OF AB PLC THROUGH OPC. SO PLEASE CLARIFY THE DOUBT. PLESE FIND THE ATTACHMENT OF ERROR BIT MAP
decan Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

4/25/2008 10:55 AM	Rate (0)
BadBit Posts: 125 Rating: (26)	Hi, the DCOM settings often prevent a connection. "start > run..." -> "dcomcnfg" for more informations follow this link: http://www.automatedsolutions.com/technotes/opcserverconnectivity/Default.asp best regards
BadBit Posts: 125 Rating: (26)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on