Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

OPC server in WinCC Prof v.11

Created by: Vladymyr at: 4/3/2013 9:29 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

4/3/2013 9:29 AM	Rate (0)
Vladymyr Posts: 10 Rating: (0)	Hi. Tell me please how to connectto OPC DA server in WinCC Proffessional v.11 (Tia portal). In "WinCC advanced v.11"this feature works fine. When i run theWinCC Proffessionalproject, i can seeOPC.SimaticHMI.CoRtHmiRTm.1. But i don`t have any access to this file. What am I doing wrong? Thanks.
Vladymyr Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

4/5/2013 2:26 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Can you post your error message? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

4/8/2013 9:13 AM	Rate (0)
Vladymyr Posts: 10 Rating: (0)	Hello, Tweety. I build and run a small project in WinCC v.11 (type WinCC RT Advanced) The project adds three tags. In "runtime settings->Services->Read/Write tag" i set the option "Operate as OPC server'. After launching the projectany OPC-client can connect to the OPC-server (see OPCConnect.jpg). I'm trying to do the same in the WinCC RT Professional project. But after the start of the project no one OPC-client can not connect to the OPC-server (see OPCConnect.jpg). How can i avoid this problem? Thanks. Attachment OPCConnect.jpg (414 Downloads)
Vladymyr Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

4/30/2013 4:14 PM	Rate (0)
JaroslavSvoboda Posts: 10 Rating: (0)	Hello Tweete and Vladymyr, I have the same problem. In WinCC 7.0 was OPC server activated automaticly with start of the runtime. Is also OPC server activated on WinCC v11 or is necessary to make some setings in project ? I cannot find any choice to check in project settings.
JaroslavSvoboda Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

3/13/2015 11:37 AM	Rate (0)
Yorique Regular Member Joined: 5/6/2012 Last visit: 10/22/2022 Posts: 1 Rating: (0)	are you solve this problem? same trouble in tia 13 sp1 upd1 wincc prof

Suggestion To thank Quote Answer

3/16/2015 10:47 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by dlk is split to a separate thread with the subject Possible to configure an OPC server with a simulated HMI?. Best regards Min_Moderator

Suggestion To thank Quote Answer

3/20/2015 9:01 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, did you install the opc server? You can choose it during installation of the runtime professional. see also this document: https://support.industry.siemens.com/cs/ww/en/view/63481236 K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on