Hi All,

I'm having a problem now where the OPC server "OPC.SimaticNET" could not be started.

There is also an error while i'm opening symbol.

Attached herewith the picture.

------------------------------------------------------------------------------------------
Split from SIMATIC NET OPC SERVER error for running in demo mode.

Hi,

With me, the problem occurs only on the machine startup and I am guessing that is some how related to the NIC not being prepared (if it is even possible). Most of times for me, a second restart solves the problem.

Cheers

wb2875e

Hi All,

I'm having a problem now where the OPC server "OPC.SimaticNET" could not be started.

There is also an error while i'm opening symbol.

Attached herewith the picture.

 Did this happen just now (in a running application) or the application is in development stage?

Hi jR08,

The problem happened during running application. Even I have done restarted the IPC for a few times, the problem still occurred.

Hello wb2875

- Which Simatic Net Version do you use?

- Which Operating System so you use?

- Is the OPC Server running in Component configurator?

- Is it possible to load the PC Station out of the Project?

Bye Murof