Hello everyone,

I am new to this Automation System and want to know:

Does online Simulator for TIA Portal V15 run on OPC Server? also i want to connect it with an Hardware HMI where my Simulation run on my hardware but i do not have a actual Hardware for HMI.

Is this possible?

Any Input is appreciated.

Best Regards

Huzi

Hi zusammen,

I posted a doubt a week ago but their is no help available i just want to know if i can make a handshake between my HMI and PLC where i have a PLC s-1518 Hardware and a want to use a RTsimulator available on TIA Portal V15.

If it is possible how?

Regards,

Huzi

huzi.saify

Hello everyone,

I am new to this Automation System and want to know:

Does online Simulator for TIA Portal V15 run on OPC Server? also i want to connect it with an Hardware HMI where my Simulation run on my hardware but i do not have a actual Hardware for HMI.

Is this possible?

Any Input is appreciated.

Best Regards

Huzi

Hello huzi.saify,

simulation HMI, using real PLC should be possible.

You can take a look at this application example:
https://support.industry.siemens.com/cs/ww/en/view/109748099

In Chapter 2.1 it is described, how to do it.

Greetings,

Nzett11