Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

open user archive by name on WinCC client

Created by: Nerli at: 3/19/2007 3:04 PM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

3/27/2007 9:03 PM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	You could try prefixing the archive name with the server data package name. In WinCC Explorer -> Server Data Editor you can see the name of your server data package. So assuming your package is named my_server_data try the following : if ( uaQueryArchiveByName ( hConnect, "my_server_data::Incoming", &hArchive) == FALSE) Salma

Suggestion To thank Quote Answer

4/3/2007 3:01 PM	Rate (0)
Nerli Posts: 21 Rating: (1)	Voila!! the problem solved by entering the address of project in script. "server_project::ua" Thanks to WinCC competence centerin Russia personally to Salma, Dec, Pinky, Danielle and Nemo.
Nerli Posts: 21 Rating: (1)
Suggestion To thank Quote Answer

6/27/2014 6:20 PM	Rate (0)
Narrator1 Bronze Member Joined: 3/25/2013 Last visit: 3/21/2019 Posts: 176 Rating: (1)	New question split intoerror 101 when try to connect the the archive table. With best regards, Narrator1

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Process- Userarchives

Follow us on