Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Optical link

Created by: MBSYSTEMS at: 1/7/2009 2:03 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/7/2009 2:03 PM	Rate (0)
MBSYSTEMS Posts: 8 Rating: (0)	Dear expert Optical ring 1 is formed with OSM and Optical ring 2 is formed with SCALANCE we want to combine as a single optical ring. Kindly advice us. best regards N.Mahesh babu
MBSYSTEMS Posts: 8 Rating: (0)	Last edited by: MBSYSTEMS at: 1/7/2009 2:04 PM
Suggestion To thank Quote Answer

1/7/2009 4:12 PM	Rate (0)
jklm Platinum Member Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (309)	Hello Have a look in this manual http://support.automation.siemens.com/WW/view/en/25508728 At page 16 and 22 (HSR mode).
	Best regards jklm Suggestion was helpful? Feel free to rate it.
Suggestion To thank Quote Answer

1/7/2009 6:02 PM	Rate (0)
INS Gold Member Joined: 4/6/2006 Last visit: 2/5/2024 Posts: 604 Rating: (56)	Hello, You can solve this with two solution but it depends on the hardware. It's easy to create one big ring with the device mixed to each other. The 2nd solution could be based on creating a standby coupling between the two ring. Therefor it's interesting to get information about the switches in both rings.
	Best regards, INS
Suggestion To thank Quote Answer

1/10/2009 8:28 PM	Rate (0)
MBSYSTEMS Posts: 8 Rating: (0)	Dear EDR thank for the information i hope this manual will support my issue. best regards MBS
MBSYSTEMS Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on