Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Optional inputs of HSC Configuration

Created by: josedaniel48 at: 2/11/2014 9:43 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/11/2014 9:43 PM	Rate (0)
josedaniel48 Posts: 2 Rating: (0)	Context: PLC S7 1200 cpu 1212C, 4 HSC inputs, 4 Digital inputs, Don't want to use extra inputs module I would like to ask you about some issue on HSC configuration When i configure the HSC fora simple phase signal, there are two optional inputs (d:counting direction and R:counting initialization). i would like to know if i can use this two OPTIONAL inputs as different digital inputs in the program so if i can configure this two optional inputs por the HSC as not used or just pre-configured from the software i would appreciate your quick answer a lot Attachment C:\Users\Jhenao1\Desktop\Capture.jpg (205 Downloads)
josedaniel48 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/12/2014 12:54 PM	Rate (0)
muratb Posts: 10 Rating: (0)	if you are going to attach your interupts in your program you can use other inputs for different purpuse. otherwise, if you setup your HSC's on device configuration you cant use those inputs..
muratb Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

2/23/2014 11:00 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Dear friend, Please consider the setting shown in the attached pic, it might help Have luck. Tomy Attachment HSC.GIF (235 Downloads)
	Aim Higher
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on