Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PAC3200- reset energy counter (KWh_import) on Wincc

Created by: Dh_1811 at: 2/27/2014 11:12 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

2/27/2014 11:12 AM	Rate (0)
Dh_1811 Posts: 24 Rating: (0)	Hi, I have set up several PAC3200 with Wincc v11 SP2 and getting the readings to display.However I would like my energy counters(KWh_import) to reset monthly and manually through the click of a button. Any ideas as to how I can perform this? Not using a PLC by the way. Regards Dh_1811
Dh_1811 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

2/27/2014 2:43 PM	Rate (0)
K!ke Posts: 1299 Rating: (133)	Hello, you can add a task to scheduler, trigger it monthly and reset the tag in "events" K!ke
K!ke Posts: 1299 Rating: (133)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

2/27/2014 3:46 PM	Rate (0)
Dh_1811 Posts: 24 Rating: (0)	Hi, I have tried that but my value wont reset. Since the tag is not a bit I have tried setting the tag using the "SetTag" and giving it avalue of 0. Still no success with that. Any other ideas? Regards, Dh_1811
Dh_1811 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on