Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PARKING MODE IN 802D SL

Created by: Tarik at: 5/9/2010 4:40 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/9/2010 4:40 AM	Rate (0)
Tarik Posts: 71 Rating: (0)	HI I AM WORKING WITH 802D SL PLUS ,I NEED TO MAKE THE Z AXIS IN PARK MODE. PLEASE ADVICE. TARIK
Tarik Posts: 71 Rating: (0)
Suggestion To thank Quote Answer

5/10/2010 6:42 AM	Rate (0)
Maddy. Posts: 20 Rating: (1)	Hello, please try enabling V380X0001.4 and disabling V380X0002.1 . i hope , this is a turning machine and Z is not vertical. Regards
Maddy. Posts: 20 Rating: (1)
Suggestion To thank Quote Answer

5/12/2010 9:18 AM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	Hi For parking axes you must put V380x0001.5 and V380x0002.1 and eventualy V380x0001.6 in 0 (disable both measuring systems from the position loop). Good luck Nit
	Last edited by: Nit at: 5/12/2010 9:35 AM
Suggestion To thank Quote Answer

5/12/2010 2:59 PM	Rate (0)
Tarik Posts: 71 Rating: (0)	HI Thank you all for your information. Regards Tarik
Tarik Posts: 71 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on