Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

passive homing

Created by: kristiandj at: 7/10/2009 7:50 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/10/2009 7:50 AM	Rate (0)
kristiandj Posts: 1 Rating: (0)	Hello I have sinamics s110 and one cu305. I need to know like making a search of the reference point, Thank you very much
kristiandj Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/10/2009 2:59 PM	Rate (0)
JakitGT Posts: 31 Rating: (0)	kristiandj, If you are homing, then I assume you have the "Basic Positioner" technology option enabled. You can set whether to use active or passive homing in the "technology/basic positioner/homing" screen. Because you mention using a reference point, then you should probably choose active homing, and you can set whether to use the encoder zero mark, or an external switch. Regards.
JakitGT Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

7/10/2009 11:11 PM	Rate (0)
Dave Posts: 271 Rating: (29)	You can access the documentation at www.automation.siemens.com/doconweb for S110 drives. Obtain a copy of the Function Manual and go to section 7.3.6.3. Here's a shortcut to the manual directly: http://www.automation.siemens.com/doconweb/pdf/SINAMICS_1008_E/FH3.pdf?p=1#page=1&view=FitBH,0&pagemode=none Hope this helps...
Dave Posts: 271 Rating: (29)	Last edited by: Dave at: 7/10/2009 11:14 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on