Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PASSWORD LOST S7 300

Created by: brackested at: 7/28/2010 12:39 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/28/2010 12:39 PM	Rate (0)
brackested Posts: 4 Rating: (0)	Dear all, Need your help.. I have siemens S7 315 with Flash EPROM 6ES7 951-0KF00-0AA0; i would like to change my CP profibus 342-5 to a new version, but i'd have a problem when i setting the hardware config. The CPU was protected by the last user (last user have forgotten the password) could i save my PLC's program? because i don't have any source file or backup file is there any way to open the password or clear the password without clear the PLC memory??
brackested Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/28/2010 12:58 PM	Rate (0)
Aristotelis Posts: 147 Rating: (34)	Hi brackested is there any way to open the password or clear the password without clear the PLC memory?? That is not possible. If the other user has just forgotten the password, I'm pretty sure he can give you the project (he keeps backups, doesn't he?), and then you can make the changes there. You then download it as usual. Keep in mind that you can NOT break the password, and that's why it is there in the first place. So no unauthorised person will be tempted to play with the program/device/production/plant etc... You can also use the Search function in upper right hand side of the page when searching for solutions in your problems. You can use for example keywords like "S7-300 password" and usually some useful information comes up. Hope this helps
Aristotelis Posts: 147 Rating: (34)
Suggestion To thank Quote Answer

2/19/2015 9:51 AM	Rate (0)
Robin George Posts: 2 Rating: (0)	Which Portal u used for Programming of this PLC?
Robin George Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/19/2015 1:32 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	Hello, It doesn't matter what software you use, password in the CPU stays. By the way the question was from 7/28/2010 12:39 PM, so I think it's solved by now. regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on