Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
5 Entries
| 10/21/2013 12:34 PM | |
Joined: 8/16/2010 Last visit: 3/30/2023 Posts: 622 Rating:
|
Hi all. What is the pinout of the mpi cable of PC adapter on the PLC side (9-pin)? Is this good configuration (attach) |
| 10/21/2013 1:19 PM | |
|
Joined: 8/16/2010 Last visit: 3/30/2023 Posts: 622 Rating:
|
Please see the attached image. I did't need cable between PC and adapter... I need cable pinout between adapter and PLC! |
| 10/21/2013 1:27 PM | |
Joined: 4/24/2006 Last visit: 3/31/2023 Posts: 8586 Rating:
|
Hello Milosh, Here is a link to manual: PC Adapter USB See chapter 4.4 Best regards, Wizard |
| 10/21/2013 4:32 PM | |
Joined: 5/28/2008 Last visit: 4/2/2023 Posts: 4401 Rating:
|
The pin assignment provided in my previous post is for a cable between the PC and the adapter. Please see Page 9 of the attached file Hope this helps.
AttachmentPC_TS Adapter - Quick Reference Guide.pdf (299 Downloads) |
Last edited by: Ayman Elotaify at: 10/21/2013 4:43 PMAyman Elotaify |
|
Follow us on