Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PC Adapter in parrell

Created by: honey361 at: 3/22/2009 9:32 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

3/22/2009 9:32 AM	Rate (0)
honey361 Bronze Member Joined: 10/21/2008 Last visit: 10/5/2024 Posts: 36 Rating: (0)	Hello, How can connect 2 pc adapter in parrell, I have a CPU 315-2DP, connect with proface touch screen via siemens PC adapter, is working, I need to connect another pc adapter parrell to see on line on my laptop, how can I make connection to connect 2 pc adapter in parrell. Asif

Suggestion To thank Quote Answer

3/22/2009 9:48 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hello, One of the sollutions is to use RS-485 repeater and split your profibus network with it.
	Best regards, Darius
Suggestion To thank Quote Answer

3/22/2009 3:40 PM	Rate (1)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 10/12/2024 Posts: 4515 Rating: (839)	Hello, You can use both ports integrated with the CPU. One is MPI and can be connected to the 1st PC with baud rate up to 187.5kbps and adjust the PG/PC interface in the control panel to PC adapter (Auto) / MPI The second is DP and can be connected to the 2nd PC with baud rate upto 12Mbps and adjust the PG/PC interface in the control panel to PC adapter (Auto) / profibus And the above solution is valid only with PC adapter USB as it supports both MPI and Profibus. Here's under the Part No. and description of adapter: *6ES7972-0CB20-0XA0* 1STANN10.526ST792614064False00SIMATIC S7, PC ADAPTER USB F. CONNECTION OF S7-200/300/400 C7; WITH USB-CABLE (5M) CAN BE USED UNDER WIN 2000/XP306.00EUR With best regards,
	Ayman Elotaify
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on