Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PC/PG communication with s7-400???

Created by: 119115 at: 4/16/2009 4:13 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

4/16/2009 4:13 PM	Rate (0)
119115 Posts: 12 Rating: (0)	when I config my net with PC/PG &S7-400,but the sys.always indicate"Could not install driver"! Can anyone help me get rid of the error? Many thanks! Attachment 1.jpg (108 Downloads)
119115 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

4/16/2009 4:16 PM	Rate (0)
119115 Posts: 12 Rating: (0)	??? Attachment 2.JPG (99 Downloads)
119115 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

4/16/2009 4:17 PM	Rate (0)
119115 Posts: 12 Rating: (0)	??? Attachment 3.JPG (87 Downloads)
119115 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

4/17/2009 8:31 AM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (172)	Hi 119115, I have some questions to you: * what does the help tells on the first of your screenshots (there's a "help" button)? * which kind of interface do you have inside your PG? * which kind of interface is selected at your PG and - is the interface somehow used in other applications? Have a look at the windows device manager, too. Is the interface installed correctly?
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

4/17/2009 12:23 PM	Rate (0)
119115 Posts: 12 Rating: (0)	My config are all here! Expect your help thank u in advance Attachment 4.jpg (92 Downloads)
119115 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

4/17/2009 12:24 PM	Rate (0)
119115 Posts: 12 Rating: (0)	Continue... Attachment 5.jpg (90 Downloads)
119115 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

4/17/2009 1:45 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 9/10/2024 Posts: 10228 Rating: (1181)	Hello 119115, Into PG/PC Interface, you have already assigned CP5611 (Profibus). And later you want to connect and assign into Netpro that will use CP5611 (MPI). Just change into PG/PC Interface to MPI and try again ... Hope this will helps. Best regards Hristo Mihalev

Suggestion To thank Quote Answer

4/17/2009 2:04 PM	Rate (0)
119115 Posts: 12 Rating: (0)	I have already done it as you said, but it seems not to be work. thank u all the same
119115 Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on