Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PC Station Comunication TIA18

Created by: tiago_vieira at: 10/31/2023 6:02 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

10/31/2023 6:02 PM	Rate (0)
tiago_vieira Member Joined: 3/7/2022 Last visit: 11/29/2023 Posts: 4 Rating: (0)	Hi everyone, I've been having a headache with a problem for a week now and I don't know what to do, so I'm asking an expert to help me please. I have TIA v18 installed on my laptop. I installed SIMATIC WinnCC Unified 18 in a PC Station IPC547G to make it a SCADA. First in the PC station, I gave the ip to the used ethernet port, In the HMI from the pc station i created conections to all plcs CPU 1510, i create tags and mapped them to the PLCs tags. I compiled and downloaded everything to the pc station/HMI and everything ok. Then i checked the Wincc Runtime Manager in the PC station to check the project running. And its all ok with green signal. Then i opened the Chrome browser in the PC station and put the ip defined, i selected runtime and i login well with the user rights defined in the project security. The page of the project is shown well but the big problem is that i cant get the values from the PLCs tags i conected with. I think i connected everything well but something is missing to get the values from the plcs conected to PC Station. Clould it be something related with certificates? Please someone help me.
	Last edited by: tiago_vieira at: 10/31/2023 18:02:59 Last edited by: tiago_vieira at: 10/31/2023 18:06:55 Last edited by: tiago_vieira at: 10/31/2023 18:08:27 Last edited by: tiago_vieira at: 10/31/2023 18:14:17
Suggestion To thank Quote Answer

10/31/2023 9:37 PM	Rate (0)
Heksu Bronze Member Joined: 12/12/2005 Last visit: 11/3/2023 Posts: 179 Rating: (12)	Hi Tiago, I hope this link is helpful. link BR Heksu
	Last edited by: Heksu at: 10/31/2023 21:38:42 "Beer is proof that God loves us and wants us to be Happy"-Benjamin Franklin
Suggestion To thank Quote Answer

11/2/2023 9:24 AM	Rate (0)
tiago_vieira Member Joined: 3/7/2022 Last visit: 11/29/2023 Posts: 4 Rating: (0)	In my case i have the scada pc station and the plcs in the same project. everything is connected, compiled and downloaded to the devices. I couldnt find usefull help in your sugestion. but thanks.

Suggestion To thank Quote Answer

11/2/2023 5:57 PM	Rate (0)
tiago_vieira Member Joined: 3/7/2022 Last visit: 11/29/2023 Posts: 4 Rating: (0)	Problem solved. It was the SET PG/PC interface configuration that was wrong. Thanks for everything

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

|

Share this page:

Share this page on...

Follow us on