Hello.

I,created the project in TIAv13 potal (according to the instructions: https://support.industry.siemens.com/cs/document/39960679/how-do-you-connect-a-pc-station-to-an-s7-1200-with-opc?dti=0&lc=en-WW ).

Everything went ok, until I try to download the project to PC Station. I get the status that Scan is completed,

0 compatible devices of 0 accessible devices found (look at the attached picture).

Any suggestions.

Thank, you.

hi vto,

some more information please.

What Engineering SW do you have exactly? V13 SP1? Upd?

What MLFB has the CPU? 6ES7212-xxxxx-xxxx?

What anti-virus-SW do you use?

Do you have a static IP-adress?

Are you connected directly on the PLC?

regards,

Hello ChristophD and mopS04.

The PC Station is on the same machine as enginering SW (I would like

to do download the PC station to local machine).

Thank you.

Best regards

I have 1 network adapter.

Where can I find softbus communication option?

Thank you.

Best regards, Jure

Hi Vto,

When Pc station is on same computer than Tia, I don't use download function but I create .xdb file from Tia.

After I read the xdb file with pc station configurator.

Nicolas

Thank you, Nicolas

Now I manage to do it.

Best regards, Jure

vto,

Next time you need to download the configuration for the first time and the scan returns 0 devices, just manually enter the ip address in the "Access address".

Hello Michael.

No, it doesn't work. The only way to download configuration is to generate XDB file and

import it manualy in the station configurator, like nico06 suggested.

Best regards