Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PCO blocks

Created by: ni lar at: 2/27/2012 11:49 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/27/2012 11:49 AM	Rate (0)
ni lar Posts: 39 Rating: (0)	Dear Friends, I want to know hwo to create PCO blocks and how to call and use existing PCO blocks in Siemens Simatic Manager. So if some body know , please advise me. Thanks. Best regards, Ni Lar
ni lar Posts: 39 Rating: (0)
Suggestion To thank Quote Answer

2/27/2012 1:10 PM	Rate (0)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 6/3/2023 Posts: 2966 Rating: (1025)	Hello ni lar I'm afraid to say that PCO is a TLA (Three Letter Acronym) that I'm not familiar with. Could you please clarify what you mean by it.
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on