Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

pcs7+Citect+OPC

Created by: Rasool S.Alizadeh at: 9/11/2008 2:27 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/11/2008 2:27 PM	Rate (0)
Rasool S.Alizadeh Advanced Member Joined: 9/27/2007 Last visit: 4/11/2024 Posts: 37 Rating: (0)	I must develop project with pcs7 and cfc but the hmi is citect. I think i must use OPC server but i dont khnow how i can do that please help me ? I khow that to create s7-connection but I dont khow how to transfer tag's into opc server??? please tell me any information about this configuration???

Suggestion To thank

9/11/2008 4:17 PM	Rate (0)
JMJ Posts: 487 Rating: (45)	I do not know why you call it PCS7 when you are using Citect. I think what you mean is an S7 PLC with CFC. There is nothing to 'transfer' to. Here is the syntax for 'item name' to access s7 variables via OPC <protocolID>:[<connectionname>]<variablename> Read this manual for more info http://support.automation.siemens.com/WW/view/en/24843817
JMJ Posts: 487 Rating: (45)	Last edited by: JMJ at: 9/11/2008 4:18 PM
Suggestion To thank

9/12/2008 11:23 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/17/2025 Posts: 4114 Rating: (195)	closed cause question posted more than once. The thread with the subject pcs7 and citectis published within the conference Industrial Software general. Best regards CS Moderator
	Last edited by: O_Moderator at: 3/17/2010 11:29 AM conference-link edited My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on