Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PCS7 WinCC Can't open

Created by: alibaba at: 1/20/2011 7:49 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

1/20/2011 7:49 AM	Rate (0)
alibaba Posts: 90 Rating: (1)	We are having a problem when we are opening WinCC – a message appears ‘NO STORAGE AVAILABLE – NOT ABLE TO PROCESS YOUR COMMAND’. And then it closes automatically. anyone can help...!! Thx aLiBaBa
alibaba Posts: 90 Rating: (1)
Suggestion To thank Quote Answer

1/24/2011 4:43 AM	Rate (0)
Yoga Shankar Posts: 288 Rating: (22)	Dear Alibaba, Do you have enough disk space( free space) on the drive in which you have stored your project? If not, try the following, in the OS project folder, open the archiving folder and make a copy of the ".ldf" and ".mdf" files into another location and then delete them. this will free considerable disk space, especially if the project has been online for a long time before. It is important to make a copy of the above files, because these are the data bases in which the Alarms, trends and tag logs are stored. at any point of time, you can get these data if you just copy the files back into their respective folders.
Yoga Shankar Posts: 288 Rating: (22)
Suggestion To thank Quote Answer

1/25/2011 10:44 AM	Rate (0)
alibaba Posts: 90 Rating: (1)	Dear Yoga, I'm really sorry but didn't work... any ideas?! Awaiting your reply, Ali M
alibaba Posts: 90 Rating: (1)
Suggestion To thank Quote Answer

2/12/2011 9:10 AM	Rate (0)
AbdulRehman Posts: 11 Rating: (0)	Hi Check this ... HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\IRPStackSize=20(HEX) If not exit then creat IRPStackSize Regards, AR
AbdulRehman Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

2/12/2011 2:04 PM	Rate (0)
alibaba Posts: 90 Rating: (1)	Dear Abdulrahman, how to creat? and what thing should not exisit? sorry I didn't get it that much .. please explain. thx aLiBaBa
alibaba Posts: 90 Rating: (1)
Suggestion To thank Quote Answer

2/16/2011 7:52 AM	Rate (0)
AbdulRehman Posts: 11 Rating: (0)	Hi alibaba In registry edit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters If the IRPStackSize entry is not present Click Edit, point to New, and then click DWORD Value. Type IRPStackSize, and then press ENTER. Click IRPStackSize, click Edit, and then click Modify. In the Data Value box, type a 20(Hex) . Reboot system
AbdulRehman Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

2/16/2011 12:02 PM	Rate (0)
alibaba Posts: 90 Rating: (1)	thx very much now is working ....
alibaba Posts: 90 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on