Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PCU20 imge pcu_20.abb loading

Created by: Gadhaviji at: 4/1/2013 12:21 PM (13 Replies)

Rating (1)

Thanks 2

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

4/1/2013 12:21 PM	Rate (1)
Gadhaviji Posts: 63 Rating: (2)	Dear Expert, In our machine PCU20 failled and no more display is comming on Op, so we have replace PCU20 by new. Now i am gatting display on OP, but in our machine we have shopturn ,we have PCU_20.ABB file with soft turn.I am using PCMCIA addater with 1GB flashcard. Steps what i have done: Insetr PCMCIA card to PG. Copy PCU_20.abb file to PCMCIA falsh card. Insert PCMCUA card to PCU20 Power ON PCU20. Put PCU 20 in Service mode by pressing 6. After pressing 6 i am gatting massage invalid .abb file. Aven after thet i have format flash card and insert empty card to PCU20 to copy .abb file from PCU20 to flash,but i am gatting same massage. Please guide me how to write PCU_20.abb to PCU 20. Why above massage is cooming while i am inserting empty flash card? Reg. HG
Gadhaviji Posts: 63 Rating: (2)
Suggestion To thank Quote Answer

4/1/2013 3:27 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, Have you formatted your flash card properly...try doing it with FAT again You need to write the .abb files into the flash card copy doesn't works.... use Cardware / Sinucom FFS Check it out.. Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

4/1/2013 4:15 PM	Rate (0)
Gadhaviji Posts: 63 Rating: (2)	Dear Expert, I have done formatting by FAT selection , but same result. I have also tried with cardware ,but after formating card i am trying in my working PCU20 ,but after pressing 6, massage invalid PCU_20.ABB is comming.Actully there is no any .ABB file in my CF card,it is empty. Reg. HG
Gadhaviji Posts: 63 Rating: (2)
Suggestion To thank Quote Answer

4/2/2013 6:04 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, Could you try with lesser capacity of CF card plugging in PCU20 I hope you have followed this steps for PCU20.abb 1. Switch OFF the control unit. 2. Insert the CF-Card using the adapter into the PCMCIA-Slot. 3. Press key „6“ during the start-up of the PCU 20 while the message”Starting caldera DR–DOS...” is being displayed. 4. Select Point < 8 > - Copy/Save internal FLASH to PC-Card (incl. configuration and OEM data). The data of the FLASH-memory are saved on the PC-Card in the file „PCU_20.abb“. 5. After the backup of the data the PCU 20 is re-started. 6. The CF-Card can now be removed. Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users PISCEAN 2010

4/3/2013 6:04 AM	Rate (0)
Gadhaviji Posts: 63 Rating: (2)	Dear Expert, What do you meanof lesser capacity by PCU20? Yes i am following same steps, but after pressing 6 ,i am gatting massage "invalid PCU_20.ABB file" but actully there is no any .ABB file in CF card. Reg. HG
Gadhaviji Posts: 63 Rating: (2)
Suggestion To thank Quote Answer

4/3/2013 7:58 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (880)	Gadhaviji Dear Expert, What do you meanof lesser capacity by PCU20? Reg. HG Card with 64 or 256 MB capacity.

Suggestion To thank Quote Answer

4/20/2013 12:54 PM	Rate (0)
Gadhaviji Posts: 63 Rating: (2)	Dear Expert, I have 1GB and 128MB flash card. I have formatted both by FAT,FAT32 in Window mode and through cardware, but while iam inserting in PCU20 ,after pressing 6 , i am gatting massage "invalid PCU_20.ABB file". Please guide me how i can resolve the issue. Thanks Reg. HG
Gadhaviji Posts: 63 Rating: (2)
Suggestion To thank Quote Answer

12/14/2015 6:29 AM	Rate (0)
srenco Posts: 5 Rating: (0)	Hello Dear I have a same problem,but i have`t PCU20_ .ABB file in backups. Could you send me your .ABB file to me also. Best Regard Saeid
srenco Posts: 5 Rating: (0)	Last edited by: Min_Moderator at: 12/15/2015 10:26:58 AM Contact data deleted
Suggestion To thank Quote Answer

12/14/2015 6:41 AM	Rate (0)
Hinglaj Regular Member Joined: 3/28/2009 Last visit: 4/27/2023 Posts: 14 Rating: (0)	Do you have any user screen? I will send you .ABB file but it will be standard.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users dingtuo

12/14/2015 7:09 AM	Rate (0)
Gadhaviji Posts: 63 Rating: (2)	ok, I will send.
Gadhaviji Posts: 63 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on