Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PCU20 shopturn

Created by: Gadhaviji at: 10/13/2011 2:08 PM (8 Replies)

Rating (1)

Thanks 1

9 Entries

10/13/2011 2:08 PM	Rate (0)
Gadhaviji Posts: 63 Rating: (2)	Dear Expert, I have 840D system with PCU 20. PCU20 is failed ,so i have replce by new PCU20. But New PCU20 is without Shopturn software,so without shopturn we are not able to run our machine. I don't have shoturn ,so please help me what is the next step to down load Shopturn in to new PCU20. Reg. Gadhavi
Gadhaviji Posts: 63 Rating: (2)
Suggestion To thank Quote Answer

10/13/2011 2:21 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... You need to have Shopturn software then only you can load it in PCU20 / if you don't have it will boot like normal HMI....best way is to contact your machine manufacturer they can able to help you.... Hope you have your machine archive backups..... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

10/13/2011 3:19 PM	Rate (0)
Gadhaviji Posts: 63 Rating: (2)	Thanks That mean i have to purchase new shopturn, Please guideme how to install shopturn in PCU20. Reg. Gadhavi
Gadhaviji Posts: 63 Rating: (2)
Suggestion To thank Quote Answer

10/13/2011 3:30 PM	Rate (0)
Gadhaviji Posts: 63 Rating: (2)	Dear Expert, Using below process ,it is possible to copy PCU20 system software with Shopturn software? I am facing problem , i could not found option 8 on HMI. Process: I have 16MB PCMCIA card , i am inserting this card to PCU 20. after iinserting this card i have power on PCU 20, I am pressing 6 when massage "starting Caldera DR-DOS " displaying on OP. But i din't find option 8 to copy system software to PCMCIA card. Reg. Gadhavi
Gadhaviji Posts: 63 Rating: (2)
Suggestion To thank Quote Answer

10/13/2011 7:12 PM	Rate (0)
matpree27 Posts: 19 Rating: (0)	hi Gadhviji, you have to purchase shopturn software for PCU20. regards, Preetam
matpree27 Posts: 19 Rating: (0)
Suggestion To thank Quote Answer

10/14/2011 5:49 AM	Rate (1)
Ekalavya Posts: 2964 Rating: (484)	Gadhaviji Thanks That mean i have to purchase new shopturn, Please guideme how to install shopturn in PCU20. Reg. Gadhavi Hello.... Please find the details.... Regards, Prakash Attachment installing shopmill_pcu20.pdf (205 Downloads)
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

10/14/2011 6:03 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Gadhaviji Dear Expert, Using below process ,it is possible to copy PCU20 system software with Shopturn software? I am facing problem , i could not found option 8 on HMI. Process: I have 16MB PCMCIA card , i am inserting this card to PCU 20. after iinserting this card i have power on PCU 20, I am pressing 6 when massage "starting Caldera DR-DOS " displaying on OP. But i din't find option 8 to copy system software to PCMCIA card. Reg. Gadhavi Hello.... Could you try format the the PCMCIA card and check it.....could be the card is not recognizing properly??? check this link how to copy the abb file from PCU20... /tf/WW/en/Posts/52728#top Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Syed_bdvt

10/17/2011 11:24 AM	Rate (0)
Gadhaviji Posts: 63 Rating: (2)	Dear All I have 1GB comact flash card ,but i don't have adapter to use this card into PCU20 PCMCA Slot . Please help me ,is it available with Siemens? If yes ,can you provide me MLFB no. to procure? If no ,from where i can get? Reg. Hinglaj
Gadhaviji Posts: 63 Rating: (2)
Suggestion To thank Quote Answer

10/17/2011 3:29 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... You can get this Comapct Flash adpater in local electronics market this supports and works... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on