Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PCU50 - want to remove password for Windows

Created by: michelblois at: 1/3/2012 2:23 PM (3 Replies)

Rating (1)

Thanks 1

4 Entries

1/3/2012 2:23 PM	Rate (0)
michelblois Posts: 1 Rating: (0)	Hello, I have a PCU50which starts with a password for Windows. Can you tell me how to remove this password? Thank you in advance!
michelblois Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 1/4/2012 1:06 AM new subject after splitting from /tf/WW/en/Posts/51802#top
Suggestion To thank Quote Answer

1/3/2012 3:48 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (473)	Hello.... Could you attach the screen shot of this ? so that it will easy to check it out. Regards, Prakash
Ekalavya Posts: 2964 Rating: (473)
Suggestion To thank Quote Answer

1/3/2012 7:57 PM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	michelblois Hello, I have a PCU50which starts with a password for Windows. Can you tell me how to remove this password? Thank you in advance! Hi I think that the Windows password is for the network connection. If you don't use it you can acknowledge with Cancel. If you use it you must go into Service Center and mark the "Reconnect at log on" field. By the way: it is better to start a new thread instead of using an old one. Good luck Nit

Suggestion To thank Quote Answer

1/20/2012 12:49 PM	Rate (1)
vinakov Posts: 1 Rating: (1)	go to servise mode windows desktop, then start - run - type "control userpasswords2" then unmark "users must enter user name...." reboot and enjoy!
vinakov Posts: 1 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Viktoro

|

Share this page:

Share this page on...

Follow us on