Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PG 710

Created by: nizu at: 12/11/2006 12:25 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/11/2006 12:25 PM	Rate (0)
nizu Member Joined: 12/11/2006 Last visit: 2/8/2021 Posts: 3 Rating: (0)	Does anybody have a manual for this computer,howdo available get programs from this computer ,i have also a lot of programs on floppys, how do convert those to use step5 for windows? Any Help is needed!

Suggestion To thank Quote Answer

12/11/2006 1:14 PM	Rate (0)
Calm_down Posts: 324 Rating: (30)	Hi, STEP5 for Windows?? What Version of STEP5 is this? Calm_down
Calm_down Posts: 324 Rating: (30)
Suggestion To thank Quote Answer

12/11/2006 1:49 PM	Rate (0)
nizu Member Joined: 12/11/2006 Last visit: 2/8/2021 Posts: 3 Rating: (0)	Sorry,it´s S5 for Windows version 5.06

Suggestion To thank Quote Answer

12/11/2006 1:55 PM	Rate (0)
shanny Posts: 44 Rating: (0)	Hi, Converting your floppies depends on the format. 3.5 inch floppies will either be in CPM or DOS. Dos can be used diectly and there are utility programs supplied with Step5 programming package to read the CPM disks. 5.25 inch floppies can be in CPM or DOS or ISIS (I Think) the rules for 5.25 in CPM or DOS are the same as for 3.5 The catch with CPM is to find which user the data is stored under. ISIS is the original Step 5 programmer operating system andas far as I know itdoes not use a file format that can be read by a modern computer disk drive. The machine required to convert these is a PG685. Have fun
shanny Posts: 44 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on