Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PG M3 WITH XP SP3

Created by: chucho060 at: 2/14/2013 6:02 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/14/2013 6:02 PM	Rate (0)
chucho060 Posts: 13 Rating: (0)	Hello i have a problem i have a new PG M3 with windows xp sp3 and installed a sofware s5 with the licenses rigth. STEP 5 VERSION 7.23 the configuration on COM 1 IS Bps 9600 Data bits 8 Parity NONE STOP BITS 1 FLOW CONTROL NONE and then my cuestion is because cant connect to plc S5 the message in ste5 say: - PLC TIME OUT and in a second PG M3 say me: INTERFACE AG NOT READY CAN I HELP ME SOME ?
chucho060 Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

2/14/2013 6:59 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 10/4/2024 Posts: 10229 Rating: (1181)	A similar threadstep 5 refuses to switch in online modeit might helps you! Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on