Hello,

I have a problem with PG/PC interface, I need to instal another driver for connection Cu320-2 and Siemens STARTER but "select" button is not active.

I try to open as administrator, and open with starter, S7 but is still not active.

Please help, what can i do in this case?

Best Regards

Thanks for reply,

I want connect via RS232, and i need a driver "Serial cable (PPI)". I have a adapter RS232 -->USB. In computer manager i can define a com port (its now a com1, 9,6 baud rate).

I can do that on xp mode and works good but connection is not stable.. i can't backup a project from drive.

Beter way is, connect via ethernet, but i don't now a ip adress (drive)...

OK, i will try with default IP.

I need to set my PC IP (IPv4) , for example: 169.254.11.30 yes?

mask: 255.255.255.0 or 255.255.0.0?

I have Windows 7 pro x64 and STARTER v4.3.1.2

Im going to see, how it work, I will let you know.

Thank you

Defaut adress is ok. But I can't find any accesible nodes..

ChristophD any other suggestions?

Yes, I have only INTEL I217-LM and is connected with CU320-2 (port X127).

I use this to connection with Siemens ET-200, its works good..

I tried to add cu320-2 into the project,

without any results.

I have no idea what could be wrong...