Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Physical state not changing Sinumerik840d

Created by: Kanny at: 9/26/2012 12:01 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/26/2012 12:01 PM	Rate (0)
Kanny Posts: 3 Rating: (0)	Hi everyone I have got the problem with sinumerik 840d HMI, I can't be able to change the physical state of the inputs from "on" to "off" and "off" to "on". I have declared variable as a booelan but I can't be able to see ON and OFF only I can be able to see ON. please help me out with this issue. Attachment Untitled-png.jpg (42 Downloads)
Kanny Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

9/26/2012 2:03 PM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 12/23/2024 Posts: 196 Rating: (5)	Dear kanny, Please let us know , which access level you have set.?

Suggestion To thank Quote Answer

9/26/2012 2:07 PM	Rate (0)
Kanny Posts: 3 Rating: (0)	thanks for your reply, I have kept access level 4(ac4).
Kanny Posts: 3 Rating: (0)	Last edited by: Kanny at: 9/26/2012 2:09 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on