Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PID_3STEP after power off and on

Created by: grzegorz914 at: 12/23/2011 1:58 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/23/2011 1:58 PM	Rate (0)
grzegorz914 Bronze Member Joined: 5/7/2011 Last visit: 6/9/2024 Posts: 14 Rating: (2)	Hi all I have successfully turned my PID_3STEP and working with automatic mode, but every power OFF and ON the PID go to the state OFF.I have also enabled option "Enable last mode after CPU restart". Why is not restored to the last state before power OFF? What I doing wrong? S7 1200 FW.2.2 Step7-Sp2 regards
	Last edited by: grzegorz914 at: 12/23/2011 4:49 PM Last edited by: grzegorz914 at: 12/23/2011 2:02 PM
Suggestion To thank Quote Answer

12/26/2011 11:03 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 10/9/2024 Posts: 4349 Rating: (1446)	Hi, despite of they are differents PID, the behavior, in the some way are similar. Take a look at: Tips: PID (FB PID_Compact) /tf/WW/en/Posts/33957#top
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on