Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PID tuning: plot of the step response TIA portal v11

Created by: NA Simatic at: 10/7/2012 8:03 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/7/2012 8:03 AM	Rate (0)
NA Simatic Posts: 41 Rating: (0)	Hello experts, This is my first time to deal with PID in Step7 v11 and my question is about manual tuning through step response. in order to accurately plot the response and find the point of inflection along with Tu and Tg: is there a tool to export the response in tabular form so that i can reconstruct a polynominal out of it and extract the point of inflexion and the tangent line exactly? or just print the curve and manually plot tangent line ...? Best regards
NA Simatic Posts: 41 Rating: (0)
Suggestion To thank Quote Answer

10/9/2012 11:58 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/28/2023 Posts: 4176 Rating: (1323)	Hi, it isn't a included tool to do it. However you could log your variables and export then as csv in the Web interface with the help of the data log function: Sample program: S7-1200 and DATA LOG https://www.automation.siemens.com/BR/tf/WW/en/Posts/57715#top
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

10/9/2012 2:25 PM	Rate (0)
NA Simatic Posts: 41 Rating: (0)	Thanks a lot Pegaia for the good hint
NA Simatic Posts: 41 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on