Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PID v1.2 in TIA v11

Created by: polonez at: 3/12/2012 9:28 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/12/2012 9:28 PM	Rate (0)
polonez Posts: 20 Rating: (1)	In v10.5 in PID compact block was some software mistake and I must used block "signal filter". If I have a v11 and I use PID v1.2 I must use that block too?
polonez Posts: 20 Rating: (1)
Suggestion To thank Quote Answer

3/13/2012 1:04 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/21/2025 Posts: 4395 Rating: (1464)	Hi, I think that the V11 version has quite the same limitation that the V10.5. At least, concerning the "inactive mode behavior".
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on