Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLC and Wincc Communication Problem Error 410E

Created by: YogendraK at: 5/18/2009 11:48 AM (8 Replies)

Rating (0)

Thanks 1

9 Entries

5/18/2009 11:48 AM	Rate (0)
YogendraK Silver Member Joined: 11/9/2008 Last visit: 10/25/2023 Posts: 400 Rating: (5)	Dear All. I'm facing the communication problem between Wincc and PLC. In Channel Dignosis following erro code is showing. 1. 410E - First Error Code 2. 4110 - Last Error Code Can anybody tell me what is exact meaning of this. "Maximum number of permissible connection in the plc exceeded" Wating for reply, regrads, Yogendra G

Suggestion To thank Quote Answer

6/9/2009 9:04 AM	Rate (0)
how come Posts: 382 Rating: (47)	Dear YogendraG, If I can understand your question correctly, do look into your PLC CPU resources/ number of resources assigned in your PLC CPU hardware configuration. Hope this helps! with regards, how come? Attachment PLC CPU Connection Resources.JPG (1458 Downloads)
how come Posts: 382 Rating: (47)
Suggestion To thank Quote Answer

6/10/2009 5:14 AM	Rate (0)
YogendraK Silver Member Joined: 11/9/2008 Last visit: 10/25/2023 Posts: 400 Rating: (5)	Hi how come, Thanks For ur reply. Regrads, Yogendra G

Suggestion To thank Quote Answer

9/14/2016 10:57 AM	Rate (0)
fme_X Posts: 1 Rating: (0)	Dear user, I am facing same problem in one of my project, i have created three set of connection under named connection protocol, but one of the connection is not working i.e when i checked the Channel diagnosis it is showing that CPU2 is disconnected. i have complied and downloaded the whole once again to respective station but can't able to solve the problem. find the attached image of error (410E) please help Attachment IMG_7287.JPG (572 Downloads)
fme_X Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/14/2016 11:36 AM	Rate (0)
bg2492 Diamond Member Joined: 5/16/2014 Last visit: 9/12/2022 Posts: 7298 Rating: (2122)	Hello fme_X, the error "410E" means: Error 410E - L4_REM_ABORT Connection has been aborted. · PLC or CP has been turned off or reset. · PLC not connected to bus or bus system error. · Maximum number of permissible connections in the PLC exceeded. the last point means, the CPU may not have static connection ressources available. Are there Panels or other devices connected on this CPU ? In the properties of the CPU, you can reduce the S7-connections and increase the number of static connections. Regards Georg Berghof
	PS: If this post did really help you, you may use the Rate-button
Suggestion To thank Quote Answer

9/16/2016 5:33 PM	Rate (0)
ehab_abdelaleem Advanced Member Joined: 9/10/2014 Last visit: 10/10/2023 Posts: 7 Rating: (2)	thanks very much

Suggestion To thank Quote Answer

2/2/2018 5:19 AM	Rate (0)
Vijay N. Posts: 7 Rating: (0)	ehab_abdelaleem thanks very much Hi Everyone, I have a same problem with CPU 412-3H PLC & WinCC 7.0. Communication is disconnecting frequently & again connected back. Channel diagnosis error showing error code 410E. As per above image I am not able to find connection resources tab under CPU properties. Please help. Regards, Vijay N.
Vijay N. Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

5/21/2019 4:13 PM	Rate (0)
JazTai Gold Member Joined: 9/9/2015 Last visit: 11/29/2023 Posts: 705 Rating: (254)	Tips: for those who want to know the error code description location [snip] Attachment S7Chndeu_Search.jpg (546 Downloads)
	Last edited by: Jen_Moderator at: 05/22/2019 13:19:01 Removed link, because it's not functional. Please give me 5 stars Rating if my post is helpful for you. :) Thank you for Rating! PCS 7 Engineer Jaz Tai , Excel Marco Singapore/China/Malaysia PCS 7 Complete Overview PCS 7 Technical Documentation
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_5723620

4/17/2023 11:44 AM	Rate (0)
Yong_Yi Member Joined: 2/7/2015 Last visit: 4/17/2023 Posts: 1 Rating: (0)	Vijay N. ehab_abdelaleem thanks very much Hi Everyone, I have a same problem with CPU 412-3H PLC & WinCC 7.0. Communication is disconnecting frequently & again connected back. Channel diagnosis error showing error code 410E. As per above image I am not able to find connection resources tab under CPU properties. Please help. Regards, Vijay N. same issue happanend on my wincc connection, did you find the answer?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Communication (OPC, S7, OtherSystem)

Follow us on