Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLC backup from 840D

Created by: Zill at: 3/20/2011 3:30 PM (3 Replies)

Rating (2)

Thanks 2

4 Entries

3/20/2011 3:30 PM	Rate (0)
Zill Posts: 3 Rating: (0)	Hi every one, I am new to 840D, How to take PLC backup from 840D system. Thanks in advance.
Zill Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

3/20/2011 3:41 PM	Rate (2)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Zill Hi every one, I am new to 840D, How to take PLC backup from 840D system. Thanks in advance. Hello Zill, you required Simatic net adapter for CP5512 card & Step 7 software for upload & down load the PLC program.Find the attached file for how to take backup. Attachment 840D How to take plc back up.pdf (848 Downloads)
	Regards, ŠΜS
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Zill

3/20/2011 5:22 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello..... Fine....you want now how to take the backup in 840D? does it is PCU50 / PCU20? If it is PCU50 you can take backup in the screen it self / NC Card / Laptop(Winpcin) / Laptop HMI advanced PC/PG....NCand PLC archive If it is PCU20 you can take the backup onNC card / Laptop(Winpcin) / Laptop HMI advanced PC/PG....Laptop(Winpcin) / Laptop HMI advanced PC/PG Simatic Manger Step 7 tool you can take the PLC backup Regards Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Zill

10/21/2015 3:10 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by shikant enter is split to a separate thread with the subject How to take PLC backup from 840D system?. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on