Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLC Controllogix

Created by: dimensional1 at: 1/17/2014 1:25 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

1/17/2014 1:25 AM	Rate (0)
dimensional1 Posts: 1 Rating: (0)	Hello!!! Can I comunicate SINAMICS S120 with PLC Controllogix in Ethernet??? I would like use the SINAMICS in MDI or transversing blocks mode. Its possible????
dimensional1 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/17/2014 10:54 AM	Rate (0)
I DT MC Profinet ... Posts: 7 Rating: (1)	Dear dimensional1, yes, it is possible to connect a SINAMICS S120 to an ControlLogix PLC via Ethernet/IP! Requirements - CU320-2 DP or CU320-2 PN with firmware version V4.5 or later - CBE20 (Communication Board Ethernet) - STARTER V4.3 SP1 or later - Rockwell Automation Logix family controller with firmware version 19 or later - RS Logix 5000 version 19 or late There are existing so called "Add On Instructions (AOI)"for Allen-Bradley Logix family controller (designed for the RSLogix programming) thatmimic standard telegrams used in the SINAMICSS120 configuration. Presently there aresix "AOI blocks" designed to coordinate with standard telegrams used in theSINAMICS S120 systems: 1. Simple speed (Standard Telegram 1) 2. Easy Positioning (Standard Telegram 111) 3. Basic MDI (Standard Telegram 111) 4. Advanced Speed (Standard Telegram 102) 5. Line Module object (Standard Telegram 370) 6. Control Unit object (Standard Telegram 390) Please send us a private messagewith your contact data, so that we can forward you further information! Thank you! Best regards, I DT MC Profinet Team
I DT MC Profinet ... Posts: 7 Rating: (1)	Last edited by: I DT MC Profinet Team at: 1/17/2014 11:00 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users cuongvcs

4/6/2014 5:19 PM	Rate (0)
everton.souza Member Joined: 4/5/2014 Last visit: 1/20/2023 Posts: 1 Rating: (0)	Hello !!!! Can you help me??? I am trying to comunicate a CU320-2 PN Firmaware 4.5 with a ControlLogix PLC firmware 19. What number of instance I use the configuration PLC?? I'm using a telegram390, PZD2/2 in CU-320-2 PN. Thanks!!!! Attachment TESTE_SINAMICS.zip (263 Downloads)

Suggestion To thank Quote Answer

4/8/2014 11:20 AM	Rate (0)
I DT MC Profinet ... Posts: 7 Rating: (1)	Dear everton.souza, can you please explain what the problem iswhen trying toconfigure the communication between the ControlLogix PLC and the CU320-2 PN? What does the sentence "What number of instance I use the configuration PLC??" mean? Please send us a private messagewith your contact data (email address), so that we can maybeforward you further information! Thank you! Best regards, I DT MC Profinet Team
I DT MC Profinet ... Posts: 7 Rating: (1)
Suggestion To thank Quote Answer

6/13/2016 10:33 AM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 10/8/2024 Posts: 1024 Rating: (14)	New question published by cuongvcs is split to a separate thread with the subject Connecting a SINAMICS S120 to ControlLogix PLC . Best regards The Helping Hand
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on