Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLC FB's missing

Created by: valeVTS at: 10/27/2009 12:02 AM (6 Replies)

Rating (1)

Thanks 0

7 Entries

10/27/2009 12:02 AM	Rate (0)
valeVTS Posts: 5 Rating: (0)	Hello, I need a help, maybe I will make stupid question but this is about SINUMERIK 3M with 6ES5921-3WB14 and everything is twighlite zone. I need to reload PLC program back to PLC controler, I have a hard copy of program. I type it in STEP 5 but where I need to use FB's step 5 give me an error. My question is: 1. Where is library for FB's block? 2. Is it in the PLC basic program so I need first to download the library from PLC and to finish with programing? Best regards Valentin
valeVTS Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/27/2009 8:03 AM	Rate (0)
Pee Ell Sea Posts: 672 Rating: (57)	HI, There are some standard blocks in the plc but others were sold as optional packages and supplied on disk probably a 51/4 inch floppy at the time. Is the full plc program not on the EPROM ?. It was normal to save the program to EPROM Pee
Pee Ell Sea Posts: 672 Rating: (57)
Suggestion To thank Quote Answer

10/27/2009 4:52 PM	Rate (1)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	Hi Log in to PLC. Do you se DB0 / DB1 ? Do you have Reset/Init the PLC ( German word Urlöschen)
	Karl
Suggestion To thank Quote Answer

10/28/2009 9:05 AM	Rate (0)
valeVTS Posts: 5 Rating: (0)	Hi, First I like to mention that I put new PLC controler to machine, the old one was mising from the machine. In the top submodule was standard EPROM module with basic program, and in the botom submodule is RAM module. The PLC program I have on a hard copy (paper) and I type it n STEP5. Yesterday it was firs time that I logo on in the PLC and read the data. I download all block's that was in the PLC. DB0/DB1 is missing. Some of the FB used in the program was there but FB from 71 to 90 are missing. Some of this FB's are used in the program. In the listing of program there are also the name's of library's of FB, DB and OB. Please help me to complete the program. If you need more information feel fre to ask. Best regards Valentin
valeVTS Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/28/2009 10:29 AM	Rate (0)
Pee Ell Sea Posts: 672 Rating: (57)	HI, You need System 3 package 1 FB's for displaying error messages etc. Have you any other system 3 controls on site ?
Pee Ell Sea Posts: 672 Rating: (57)
Suggestion To thank Quote Answer

10/28/2009 10:50 AM	Rate (0)
valeVTS Posts: 5 Rating: (0)	Sinumerik 3 No we don't. We have sinumerik 810. Valentin
valeVTS Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/29/2009 8:39 AM	Rate (0)
valeVTS Posts: 5 Rating: (0)	I'm still loking for FB's from 71 to 89. Valentin
valeVTS Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on