Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Plcsim s7-1500

Created by: mal_er at: 10/27/2014 9:42 PM (14 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

10/29/2014 3:39 PM	Rate (0)
mal_er Posts: 32 Rating: (1)	Ok I did as you said and unfortunately does not work. In the picture is the lack of configuration error. Attachment Bez tytułu 3.jpg (135 Downloads)
mal_er Posts: 32 Rating: (1)
Suggestion To thank Quote Answer

10/29/2014 4:40 PM	Rate (0)
dsout Posts: 66 Rating: (5)	Can you check if you have PLCSIM V13.0 SE? In TIA or in PLCSIM click Help -> Installed Software... -> Detailed information Mine is attached. If you don't have the SE version of PLCSIM, you should open the PLCSIM installer and perform a "Repair" option. There is a problem with the non-SE version of the installer that can be resolved by performing a repair. Attachment dsout_installed_products.jpg (146 Downloads)
dsout Posts: 66 Rating: (5)
Suggestion To thank Quote Answer

10/29/2014 4:43 PM	Rate (0)
mal_er Posts: 32 Rating: (1)	And it may be by the fact that I had previously installed a trial TIA V13 and V12 not. I can not remove the trial license.
mal_er Posts: 32 Rating: (1)
Suggestion To thank Quote Answer

10/29/2014 4:49 PM	Rate (0)
dsout Posts: 66 Rating: (5)	If you have license problems, TIA Portal and PLCSIM should show a message box. You can always open the Automation License Manager to check on the state of your licenses.
dsout Posts: 66 Rating: (5)
Suggestion To thank Quote Answer

6/21/2015 6:02 PM	Rate (0)
mal_er Posts: 32 Rating: (1)	Hello everyone. I wanted to tell you that I ran on my laptop PLCSIM. I reinstalled Windows, and changed his version, before he was 32 and now 64 bit win 7 professional. After updating the TIA V13 with SP1 and Update 2 running simulation S7-1200. Thank you for your help.
mal_er Posts: 32 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on