Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLCSIM wiz Intouch

Created by: A_Taher at: 4/22/2010 8:04 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/22/2010 8:04 AM	Rate (0)
A_Taher Posts: 34 Rating: (1)	Dear esteemed members ; I want to test simulation with Intouch 10.1 using PLCSIM 5.4 SP3..Can any one tell me how to do communication between them. And at least I want to know how to connect simatic net to PLCSIM.This communication is very important for me . Thank you all
A_Taher Posts: 34 Rating: (1)
Suggestion To thank Quote Answer

4/22/2010 12:12 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Hello A_Taher, You could start with /tf/WW/en/Posts/34097 Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

4/22/2010 12:29 PM	Rate (0)
A_Taher Posts: 34 Rating: (1)	Dear Hristo ; thank you for your help.I already tried nettoplc...but it has restrictions and i want to enjoy all options as if i'm accessing real CPU...Can you help ??
A_Taher Posts: 34 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on