Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Please help. WinCC Comfort/Advance V11 SP2 + Simatic HMI TP1200

Created by: Glen Fox at: 7/8/2012 11:19 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/8/2012 11:19 AM	Rate (0)
Glen Fox Posts: 11 Rating: (1)	Dear Guys, Can I use WinCC Comfort/Advance V11 SP2 to Program a Digital Signal on Simatic HMI TP1200 to control LOGO 0BA7. if so could you be so kind and give me a sample program so i can better understand it. A am doing trial and error here i hope you guys can lend a hand. Thank you all in advance.. and more Power...
Glen Fox Posts: 11 Rating: (1)	Last edited by: Glen Fox at: 7/8/2012 12:55 PM
Suggestion To thank Quote Answer

7/8/2012 4:20 PM	Rate (0)
Glen Fox Posts: 11 Rating: (1)	It was a rough start but i finally got it Reading old entry helps a lot... Thank you guys for keeping this forum alive..
Glen Fox Posts: 11 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on