IBN-Service

You may try my tool
"DIAG_FILTER" FC299.

Downloadsection at
www.ibn-service.com

 Hi!

I am trying to use FB126 or FC299 IN TIA PORTAL V13 SP1, for Profinet purposes, but not luck!

I migrated your program to TIA and copy the blocks (without DB200) I started the CPU and expected it create the DB200 (I am using Im-151-8 CPU)  but the CPU dind' create the DB200, so the FC299 shows an error on "errordb" output, I tried to simulate your program, go online blocks and upload your db200 to the offline project, migrate this new project with the db200, and copy to my previous program. but not luck again!

I forgot to say that it seems don't le tme copy the migrated DB200 from the online CPU, as showed in the image.

I don't know how to do this work ....

See image attached of the

At the end I put the FB126 DB126 on the OB100 and it create the DB200, I disconnected one the frecuency converters but the DB300 don't show it,

Soory, but I am a little lost...wit this function...

see image

New question published by aliuta2000 is split to a separate thread with the subject Need to put alarms on the distributed Profinet IO to see when have one of module in error/ not communicating .

Best regards
Jen_Moderator