Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

portal 11

Created by: Rudrani at: 4/1/2012 12:05 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/1/2012 12:05 PM	Rate (0)
Rudrani Posts: 163 Rating: (4)	respected sir, I am using a CPU 1214C AC/DC/RLY. Size of my program is more than 1.5 MB so i need to reduce usage of work memory or otherwise i have to use a simatic memory card. In my program info , there is a droup down list to select 1 MB, 2 MB, 24MB load memory but i am unable to activate these options. So can you please tell me how do i activate it and whether it is helpful to reduce memory usage? also please tell me whether unlinked data blocks can help to reduce usage of work memory?..... regards, Rudrani
Rudrani Posts: 163 Rating: (4)	Last edited by: rudrani at: 4/1/2012 12:11 PM
Suggestion To thank Quote Answer

4/2/2012 12:39 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 2/1/2023 Posts: 4177 Rating: (1324)	Hi, unlinked DB helps IF you use from a set of "n" DBs, just "one" per time (for example, for recipes propouses). I don't know this memory selection that you mentioned. Can you place a printscreen of that? About the memory usage: If the problem stay in the load memory, the sugestions are use a memory card and/or reduce the comentary of the program.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/3/2012 7:12 AM	Rate (0)
Rudrani Posts: 163 Rating: (4)	Hi, Please check the attached file..... Whether this selection is useful to reduce the usage of work memory......? Attachment print screen.zip (74 Downloads)
Rudrani Posts: 163 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on