Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Porting from s7 v5.4 SP4 to S7 TIA v11 Basic Version

Created by: robyfarci at: 9/29/2011 11:26 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/29/2011 11:26 AM	Rate (0)
robyfarci Posts: 3 Rating: (0)	Hi all!! I have a problem :( is it possible to porting a project made in S7 v 5.4 SP4 in to S7 TIA v11 Basic Version? I had wrote a program in SCL for a PLC Siemens S7-300 and I would migrate to S7-1200. Thank you for your answers. Best regards. Roberto Farci
robyfarci Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

9/29/2011 3:21 PM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 1/29/2025 Posts: 1940 Rating: (137)	Hello, you can migrate projects from STEP 7 V5.4+SP5 or from STEP 7 V5.5 to STEP 7 V11 (TIA Portal). S7-SCL is only by S7-300/400 of STEP 7 V11 (TIA Portal) possible, but not possible by the S7-1200. For S7-SCL by S7-1200 in STEP 7 V11 (TIA Portal) you need the SP2, but this is not still released. With best regards Cicero

Suggestion To thank Quote Answer

9/29/2011 5:59 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 2/19/2025 Posts: 4404 Rating: (1470)	Just a notes: SP5 for Step 7 5.4 = http://support.automation.siemens.com/BR/view/en/36184684
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

9/30/2011 11:02 AM	Rate (0)
robyfarci Posts: 3 Rating: (0)	thank you all for your answers. Another two questions: is it possible know when SP2 for TIA v11 been release? is it possible know, with the SP2, I can migrate a project form S7 v 5.4 SP5 to TIA v11 SP2? Best Regards. Roberto Farci.
robyfarci Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on