Navigation

POSITION CONTROL OF S-120 using s7-1200 vai Profinet

Created by: VICKYDIGITAL at: 2/27/2013 9:55 AM (1 Replies)

2/27/2013 9:55 AM	Rate (0)
VICKYDIGITAL Posts: 19 Rating: (1)	I am using Sinamics S-120 DRIVE with CU320-2 PN using S7-1200 CPU1214C Vai Profinet. But i am not able to configure this profinet configuration in TIA portal V11 software. Can any body guide me or give me demo program for the same. Thanks in advance.
VICKYDIGITAL Posts: 19 Rating: (1)
Suggestion To thank Quote Answer

2/27/2013 11:22 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 1/27/2023 Posts: 5404 Rating: (727)	Hello, You can use the following small example project made in TIA Portal V11SP2. It contains a S110 instead of a S120 - but - you can use the communication configuration as an example for one axis for a S120 system. The important thing is the communication part. If you select the basic positioner (EPOS) in the S120 you can transfer the telegram 111 between PLC and Control Unit. The rest is an applicationissue on PLC side Attachment D:\temp\S7_1200_CU305PN_TIA11SP2.zip (945 Downloads)
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer